Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
What I want to know, is why does it cost $90 for a piece of 10mm plate with a few holes in it, even 12mm plate , plus 3 hi-tensile bolts.
I could easily make a similar plate, even thicker and out of bizoloy for probably $10 max in material cost, plus say $15 worth of bolts and washers.
Are these "bought" ones tested and stamped with a load rating?
No, I don't make them, and not trying to drum up work, but I tell ya what, I'm thinking of it!!
Reply With Quote
