Quote Originally Posted by mudski View Post
Cheers Daz.
As it stands now with my current compressor. I have two switches, one to turn the compressor on, it will only run though if its below the set pressure switch. And then theres the actual locker switch.

So I'm assuming, well hoping, with the new loom, I can do a third function of just soley running the compressor.
yeah nah its right now. The locker switch just turns on a Solenoid to activate your airlocker. I assume your running the ARB loom for the diff locker compressor? if so and you are happy to remove the locker compressor? then literally just remove the locker compressor and install the new one and plug it back in... Nothing to do, nothing to change.

The first switch turns on the compressor. The airlock switch does nothing to the compressor other than use air and initiate the low pressure switch to activate the compressor again. The ARB loom powers up the air locker switch Pin2 from the Pin3 on the Compressor switch but this is irrelevant to you.

The only thing you may need to alter is the supply size tot he new compressor and the size of the relay to activate it so only the Battery to Compressor side of the loom, the rest stays the same.