Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Mudski's High Warn High Mount Rebuild into an ARB GU Bar
Filled the odd shaped hole in on the top and the two large round holes.
Not a bad job for a noob welder. IMG_2956.jpg IMG_2957.jpg
Just waiting on an answer from ARB if the rubber bumpers are still available before I cut them out. The bolts holding them in are really rusted and need to be cut off.
I’m trying to get another weld on two aerial mounts from ARB as well. ARB being a customer of mine I have a few contacts on the inside so hopefully they come through with the goods. I might have to hit them up for some BP’s too I reckon.
Gotta weld in this plate to fill the front hole too.
It used to have a W in this hole for Warn. IMG_2959.jpg
Reply With Quote