Where is the best place to get an engine rebuild kit for a y60 td42, that we also would like to turbo in the future
Where is the best place to get an engine rebuild kit for a y60 td42, that we also would like to turbo in the future
has anyone got a set of extractors to suit a 4.2 non turboed diesel --99 gu cab chassis--i know it would be rather rare to find some ,but i am just putting it out there---also chasing a front grab handle that goes on front pillar,greyish green in colour--cheers boagie
You don't drive...you patrol!
99 gu dx 4.2 diesel cab chassis - "THE GOLD DIGGER"
4.2 diesel uses the same extractors as 4.2 (and 4.5 I think) petrol, so not as rare as you might think.
Tony
Boagie (22nd March 2011)
Apart from wreckers, you might want to try Nizzbits or Patrolapart for the grab handle.Originally Posted by Boagie
has anyone got a set of extractors to suit a 4.2 non turboed diesel --99 gu cab chassis--i know it would be rather rare to find some ,but i am just putting it out there---also chasing a front grab handle that goes on front pillar,greyish green in colour--cheers boagie
Boagie (22nd March 2011)
Some on gumtree, north of Perth
http://perth.gumtree.com.au/c-Cars-V...AdIdZ257589257
Boagie (22nd March 2011)
onlineautoparts.com.au has been competitive on the swivel hub kit, disc brake rotors and a few other bits I have bought from them. They are just down the road from me, but they do ship internationally according to their site.
I need a grill from a GQ prefer with indicators attached. Let me know if you have one and whats the price
Thanks John
Got the recovery point on yesterday. Three Super Hi-Tensile bolts and plate for $70, thought that was okay.
Took a bit of effort to get one of the bolts in, all three are now super tight and ready to go.
Last edited by molongmick; 27th March 2011 at 09:36 PM.
Cheers Mick
Everyone makes mistakes, the trick is to make them when no-one is looking.
if you go to ARB they have recovery points for GU's from $90.00 each plus fitting had mine fitted at penrith ARB late last year
What I want to know, is why does it cost $90 for a piece of 10mm plate with a few holes in it, even 12mm plate , plus 3 hi-tensile bolts.
I could easily make a similar plate, even thicker and out of bizoloy for probably $10 max in material cost, plus say $15 worth of bolts and washers.
Are these "bought" ones tested and stamped with a load rating?
No, I don't make them, and not trying to drum up work, but I tell ya what, I'm thinking of it!!
YNOT (27th March 2011)
Posting Permissions
Reply With Quote
