OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 57

Thread: Coil Tower Braces

Threaded View

  1. #1
    Beginner Gertie's Avatar
    Join Date
    Jun 2015
    Location
    Hamilton Vic
    Posts
    28
    Thanks
    33
    Thanked 14 Times in 6 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Coil Tower Braces

    So I realized I had a huge crack in my driver's side rear coil tower, a common problem it seems with GU's.
    After reading quite a few threads I decided to repair then fit a pair of Boss Coil Tower Braces.
    Easy job if you have access to a hoist, and certainly worthwhile as a preventative measure if you haven't already.
    I went with the Boss ones as they helped pull the tower back into line to make it easy to mig up.
    They are east to fit, just bolt straight in, a couple of the driver's side nuts are a bit of a pain to get on the top, had to bend up a bit of metal to hold it in place, but apart from that a piece of cake.
    Also chucked in a 2" lift and set of 35's while I was at it, looks sweet now! Took her for a drive up the Grampians for the long weekend and she handled beautifully repaired tower.jpgbroken tower 2.jpgbroken coil tower.jpgboss tower brace.jpgwith lift and 35s.jpg

  2. The Following 7 Users Say Thank You to Gertie For This Useful Post:

    4bye4 (9th June 2015), Clunk (9th June 2015), MudRunnerTD (13th June 2017), Rocket55 (9th June 2015), Stropp (10th June 2015), threedogs (9th June 2015), torrietunna (31st March 2018)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •