So I took out my fan today as it was not working. (Had the same resistance when hot as when cold). I was about to do what Parksey had done with his when I noticed that the clutch had the 4 bolts holding the fan in.

image-2345225815.jpg

So I removed them and the fan.

image-1896769033.jpg

image-994308136.jpg

And on the other side there was another 4 bolts that held the 2 pieces together. So I removed them as well.


image-1115767669.jpg

image-4124752866.jpg

And this was the result.


image-4120151826.jpg

So my questions are:
Can I get the oil/silicone to refill it.
Am I right in assuming that if the resistance is the same when hot as it is cold it means it is not working properly.
If I can get the oil where do I get it and what is it.

Sent from my iPhone using Forum Runner