So I took out my fan today as it was not working. (Had the same resistance when hot as when cold). I was about to do what Parksey had done with his when I noticed that the clutch had the 4 bolts holding the fan in.
image-2345225815.jpg
So I removed them and the fan.
image-1896769033.jpg
image-994308136.jpg
And on the other side there was another 4 bolts that held the 2 pieces together. So I removed them as well.
image-1115767669.jpg
image-4124752866.jpg
And this was the result.
image-4120151826.jpg
So my questions are:
Can I get the oil/silicone to refill it.
Am I right in assuming that if the resistance is the same when hot as it is cold it means it is not working properly.
If I can get the oil where do I get it and what is it.
Sent from my iPhone using Forum Runner