OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 10

Thread: Legal and certified child restraint point with drawers installed for a GU

Threaded View

  1. #2
    Beginner Wackyrider's Avatar
    Join Date
    Jul 2018
    Posts
    23
    Thanks
    1
    Thanked 7 Times in 5 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    You will need a magnetic pick up tool to make your life easy here. Place the dimpled washer from the large hole in the right of the pic in the above post. It should locate itself easily enough over the hole.

    Then use the magnetic tool again to place the nut and spring washer. A small screw driver is your friend to keep them in place while you detach them from the magnet.



    Start the bolt threading on by hand slowly till you can feel it grip the threads. Then get a spanner onto the nut through the same opening. Little tip to stuff a rag over the column that holds the tail light in case the spanner slips out of your hand.


    Sent from my iPhone using Tapatalk

  2. The Following User Says Thank You to Wackyrider For This Useful Post:

    MudRunnerTD (7th June 2019)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •