Quote Originally Posted by Bidja View Post
If not happy with result take it back. Alos, It is up to them to decide what caster correction needed. Maybe if not happy find someone more competent.

Think only 2-3 deg caster correction bushes available for max 3" lift, or then use drop boxes eg for example:

https://www.superiorengineering.com....rch=drop%20box

With lift measurement may be able to help out. Mine 08 Wag with 2" but carries a bit of wt. Give me your measurement from under guard arch to wheel center x 4 or to the bottom of rim bead/lip and dia of rim at that lip point and I will do lift comparison for you as reference.

Thank I will measure soon, I can’t take it back as they were in a different town. I like in a small town and there’s only one wheel alligner and he’s no good so I went out of town.
I didn’t like the lack of knowledge I got from the guy there either.
I asked “so I should get some caster added to correct the pulling to the lift” their response “ we adjusted your toe in so the wheels are now perfectly straight should be all good now”

The didn’t even understand what I was saying and obviously they didn’t do a before and after Drive. Least is was only $44 trade discount. Lesson learned I’ll give another place a go next time but from all I’ve read caster bushes are likely to be needed.
I’ll measure those specs and let you know