Capture.JPG

just wanted to share this, the caster specs say minimum 3 degrees i have 0.08 & 0.14 according to the wheel alignment
ive settled for 2 degree bushes (rubber)

reasons are because rubber is better off road while i dont do alot i still want some ability without hindrance
and 2 degree is also better than 3 degree bushes for off roading because it doesnt hinder as much as 3 degree bushes.

at the end of the day these caster bushes are going to effect flex iv been told but again im not a serious off roader.

so my specs will be bellow the spec of 3 degree but im hoping itll be un noticable and 2 degree should help the car hold a straight line.
i will continue to update on how i go with this in the hopes to help others and get other advise .
thanks