OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 7 of 7

Thread: Nord Lock Washers

Threaded View

  1. #1
    Travelling Podologist Cuppa's Avatar
    Join Date
    Jan 2011
    Location
    Ballarat, Vic
    Posts
    6,792
    Thanks
    2,164
    Thanked 7,530 Times in 3,038 Posts
    Mentioned
    176 Post(s)
    Tagged
    0 Thread(s)

    Nord Lock Washers

    Has anyone used these babies? I only learned of their existence yesterday.

    I was at the bolt shop yesterday & wanting something better than nyloc nuts to secure the canopy on my Patrol. Nylocs have been ok, but have needed regular retightening, as have Nylocs + spring washers. Bolt shop said next step up was 'cone' nuts, but they didn't have any in the size/thread to suit the bolts I had (M12 metric fine/1.25 pitch/ high tensile 10.9) but mentioned the Nord Lock washers as being a step up from cone nuts. They had a demo, tighten a wing nut up to just finger tight & then try to undo. The effort needed to undo was quite impressive, so much so I bought 10 washers at $3.50 each! Have fitted all the new bolts today (replacing a mish mash of different bolts requiring several different spanners!) together with the Nord Lock washers & nylocs - fingers crossed.

    https://www.hobson.com.au/page/nord-...el-washers.php
    Last edited by Cuppa; 6th June 2018 at 08:24 AM.

    2006 4.2TDi ex-Telstra Remote area Camper.
    Patrol Sold after 11 years of ownership Replaced with 2006 OKA NT Expedition Truck. Cummins, Allison & lots of goodies
    A Nomadic Life (Blog)

  2. The Following 3 Users Say Thank You to Cuppa For This Useful Post:

    Bigcol (6th June 2018), Bloggsy (6th June 2018), MudRunnerTD (6th June 2018)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •