Fitting a Redarc TowPro to a GUIV

[Bacho86]

Thanks gents.

Yeah I already have an old style haymenreece controller that has failed. I am trying to figure out if the wiring is the same and I just cut and slice. All good gents you have given me a good start.

@Bacho86 I am hoping one day to fit locker switches in that spot but h ad considered it.

@GeeYou8 yeah I have relocated my Sub tank switch from the blind spot to beside the gear box surround which is awesome.

I really need to be able to see and access this switch in an emergency without fumbling around looking for it yeah?

Yes I had similar hopes with future switches, however that dream was awhile away and I had the reality of trying to install the tow pro controller now.

On a positive, it's only a couple small holes in a removable panel so can either be replaced in the future or can be relocated easily (data cable is a couple meters long from memory) if required when you have the need for more switches!!

With regards for location, the befit of this unit is that its automatic, ie for normal driving once you've set for the load / conditions you won't need to play with it much - however for off road use, (which no doubt you'll use), you've got he ability for manual override - for which you'd want easy access.

Plus it's always nice to be able to see how it's operating


Sent from my iPhone using Tapatalk