Originally Posted by Bacho86
Hi, the red wire from the controller goes to the green/yellow wire on the brake pedal switch. All the wires from the controller are labeled.
Cheers
Sent from my iPhone using Tapatalk Pro
Hi, the red wire from the controller goes to the green/yellow wire on the brake pedal switch. All the wires from the controller are labeled.
Cheers
Sent from my iPhone using Tapatalk Pro
Bacho86 (15th September 2017)
Few Bunnings snags!!! Can't beat them......
2005 TD42TI
Bush Ranger (16th September 2017), Yeti's Beast (16th September 2017)
It's the finer details that count. Especially when there's only 45 of them.
When I brought my r8 it came with the compartment where the cup holder is, but no id build tag. Went to a hsv dealer and ordered a new one. Not bad for something that's 15 years old and they're still made in Clayton.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
Love this stove same as mine
Lucus30's 1999 GU ST TB45E
That's a neat little cooker, never seen that before!
Sent from my iPhone using Tapatalk
Good to hear! I almost bought the hyper flame, but read a few bad reviews about them, so decided on this one. do you only use it on lpg or have you used the little Coleman gas bottle as well?
It's a huge cooker lol - comfortably fits 2 x 32cm pans / pots on.
Hopefully it'll be a winner!
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
I use both, probably more the small cylinders.
I'd recommend the carry bag you can fit 2 cylinders and the plate in it. The only downside is the plate is no where near as good as a cast iron plate, I also managed to bend my plate though not sure if it warped from the heat.
Lucus30's 1999 GU ST TB45E
Bacho86 (19th September 2017)
A good idea is to trim the tails of your cable ties with flush cutters, or if you don't have a set use toe nail clippers, the sharp end can cut next time you reach in. Good to see you used a butt splice & not one of those dreaded scotch-locs, if you need to splice outside the cabin you can get butt splices with a built in heatshrink sleeve that is lined with hot melt glue (got mine from Altronics).
Graham
Yeti's Beast (22nd September 2017)
...............
Sent from my iPhone using Tapatalk
KATROL- The 2nd
GU TD42TGi
Not as pretty, but a whole lot tougher
Silent member 1208
Yes Michael, I bought a JEE.....60.
...............
Sent from my iPhone using Tapatalk
...............
Sent from my iPhone using Tapatalk
KATROL- The 2nd
GU TD42TGi
Not as pretty, but a whole lot tougher
Silent member 1208
Yes Michael, I bought a JEE.....60.
Clunk (25th September 2017), Maxhead (22nd September 2017), MudRunnerTD (23rd September 2017), TPC (21st September 2017)
Posting Permissions
Reply With Quote
