@MudRunnerTD That red hook should of had a gusset plate welded on the underside of the bar, But that was then eh
remember those washers ARB welded on the front of their bars cause the eyelets were ripping open.
Better to grind them off altogether plus some pre air bag bull bars had the facility to bolt some
black hooks to them as well, these too needed a gusset plate minimum 6mm .
We have come a long way since then though and hopefully common sense takes over,
as the recovery gear improves , but this is only about the tow pin eh.
Ive also found after buying over 5000 rated hooks,,,,,, that the chrome
ones tend to stretch and break more than the black ones
Reply With Quote