What did you do to your Patrol today!

[BigRAWesty]

Only had 17 days...but still had time to check so much out... Work next week..:-(

Bloody work, always gets in the way.

[threedogs]

Pitb but finally drilled and wired up my DRLs. they are switched through a negitive earth.
they are 9 watt bulls eye, I have permission from Clubby8 lol, they are 100mm apart,
I will also be wiring a flat cob light into the system to illuminate the winch spool.
All led so little power draw.
Highly recommend these Cob leds for any lighting you may have

[Majestic]

Pitb but finally drilled and wired up my DRLs. they are switched through a negitive earth.
they are 9 watt bulls eye, I have permission from Clubby8 lol, they are 100mm apart,
I will also be wiring a flat cob light into the system to illuminate the winch spool.
All led so little power draw.
Highly recommend these Cob leds for any lighting you may have

So do they turn off when the headlights are turned on or do they remain on even at night?

I tried wiring some up a while back but I had no luck, I'm not sure if it was the wiring harness or not.

[BigRAWesty]

Pitb but finally drilled and wired up my DRLs. they are switched through a negitive earth.
they are 9 watt bulls eye, I have permission from Clubby8 lol, they are 100mm apart,
I will also be wiring a flat cob light into the system to illuminate the winch spool.
All led so little power draw.
Highly recommend these Cob leds for any lighting you may have

That's starting to look like a muster truck.
Planning a few B&s parties are ya td

[threedogs]

So do they turn off when the headlights are turned on or do they remain on even at night?

I tried wiring some up a while back but I had no luck, I'm not sure if it was the wiring harness or not.

they are wired so I manually switch them off bummer but was all I had here.
My sons an Auto lec so Ill ask if he can wire them through a relay to turn off when lights are on

[threedogs]

Got around to fitting a boost adaptor plate , that fits under the OE sensor.
Took about 2 mins and looks very neat, was it worth $50 not sure but saves you drilling
or soldering on any bungs.
My old teflon one broke and I cant see how,boost was all over the place.
Hopefully this boost plate adaptor will fix that. it even came with spacers for the engine cover
but I dont have mine fitted. Highly recommend
Weather still cold as a frog here today

http://www.ebay.com.au/itm/Nissan-Pa...item3d00062dd3

[BigRAWesty]

Washed it. Lol

[Clunk]

drove it to work after 3 weeks of it sitting on the front yard looking all lonely and forlorn........... I should really get cracking with fitting the new suspension

[Dman2603]

drove it to work after 3 weeks of it sitting on the front yard looking all lonely and forlorn........... I should really get cracking with fitting the new suspension

Yes you should!! The joys of having a company car! Eh
How were the eyes this morning?

[Clunk]

Yes you should!! The joys of having a company car! Eh
How were the eyes this morning?

they've been worse