Tb42 duel fuel carby issues

[dom14]

has to be approved supplier and an approved installer here in Perth as well
under the Road Traffic Act

ok, so what happens if your Tacometric Relay dies - you wont find another the same as what you have, as it has probably been superseded
do you go for something similar (maybe 5 wires instead of 4 or vise a versa ) or pull out the whole system because its Not the same as what was fitted??????

a bit like not being allowed to replace your drag link with a Tough Dog one, because your one is bent..........

I think someone is pulling your chain


as long as it is an Approved installer (who SHOULD know what they are doing) - there is no reason for it not to be legal

must be approved by the Transport Dept. I think they do it

I reckon electric stuff like LPG safety switch & gauges, etc can be replaced by similar ones without having to go to a qualified installer. Of course, if the replacement is not compatible, then you have a problem and probably have to go to an installer to have it properly wired. I had to replace my safety switch. The original one was some crap brand and I replaced it with a PEEL safety switch, which is still going without any dramas.
What I was been told by a fella(perhaps from NSW or Queensland), that there are approved converters and a mixers or hybrid of those for each car by the alternative fuel board. Even though it can perfectly fit, just importing a brand and model that's not in the alternative fuel board's approved list won't be allowed to install on cars. Dunno about the truth of it, but that's what i was told.

Hey....hang on a sec.....you kicked my ass repeatedly in the other thread for messing with my LPG gear, now you've become liberal and calling me chicken.

BTW, if you are right, I would go back to my original idea of importing a LPG liquid sequential injection system(comes with it's own ECU) from China and either install/upgrade myself or get a fitter to do that. I was going to get a kit anyway, but couldn't find a kit that's guaranteed to work with a 6 cylinder carby engine. Plenty for 4 cylinder engines though.