Quote Originally Posted by funkyranga View Post
Guys,

I have read this thread from start to finish.
loads of information.
here are my thoughts/ questions.
I have a 2012 CRD
I will fit an EGR blocking plate
Hole or no hole?
I have a scangauge 2
I see the plates available on line have about a 10mm hole, this seems quite large, I know its there to satisfy the ECU.
but wont it still allow a fair amount of crap through?
partially blocked, Hmmm.... interesting concept. will fill up with gunk over a longer period of time......
has anyone tried a smaller hole?
it appears from information in this thread that if you don't have a hole it just throws a code P0401 (no big deal I read)
I may do the experiment myself, no hole, 3mm hole, 5mm hole etc.

any feedback or thought would be appreciated.

I am going to install a

here are my t
IMO. If your going to use a plate with the hole, don't bother. Your still letting through the nasties, it just takes longer...
Hodges CRD is fully blocked, he only get the error on his scan gauge and don't even bother with it.

Cheers.
Mark.

Edit : why is your name familiar?