OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 63

Thread: Dawes and Needle valve issues

Threaded View

  1. #11
    The master farter mudski's Avatar
    Join Date
    Apr 2012
    Location
    Eltham North
    Posts
    15,847
    Thanks
    8,900
    Thanked 11,618 Times in 6,578 Posts
    Mentioned
    477 Post(s)
    Tagged
    2 Thread(s)
    What I would do here is, remove the dawes, check the spring again, and make sure the spring is not binding up inside the dawes. Sounds to me it is and its not letting the tension off the spring. When you put it back together, wind the dawes in slow and you will feel the spring in there slipping on the adjuster cap, if it feels notchy, check that the spring hasn't dug a small groove in the body of the dawes causing it to catch. I get quite a few people come to me with issues like this and its just the spring causing is from the constant adjust and re adjust. You'll get it soon enough mate.

  2. The Following User Says Thank You to mudski For This Useful Post:

    Dinger (20th March 2015)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •