GQ Auto Hubs now making clicking noise

[doka404]

Thanks doka404. I think you are right that a circlip or something is holding the other 2 bits on the axle missing from the back of the hub although I cannot see right now how to get them off. Do you think this is how it was or have they re-assembled it wrong? The pics of auto hubs I see on the net show that those 2 back bits should normally be at the back of the auto hub.

Funny this is that everything I saw had those pieces still attached to the hub when you pulled it off as well .

But I just rebuilt my swivel hubs the other day and when I pulled my hubs off I had exactly the same setup as you. There is defiantly a circlip and a washer holding them on. Well was on mine and so I assume there would be on yours too as it sounds like a similar setup.

I just ditched the auto pieces as i mentioned above..

EDIT have a look at the exploded diagram in the link I posted..shows the circlip and the washer in front of the auto locking mechanism the way it is setup on yours and was on mine