Favourite mod under $50

[Dave_H]

You do know it only takes a few minutes to change.

Yeah from what i've seen and read you just need to grind the head off and remove the pins and then bolt the new one on, is that correct?

[sooty_10]

Yeah from what i've seen and read you just need to grind the head off and remove the pins and then bolt the new one on, is that correct?

Pretty much it mate..... simple.

[lucus30]

The forum sticker.
That's the only thing I could think of for under $50.

The sticker on the bullbar looks wicked. Might have to do the same

[Beni C]

Well for me so far it is a digital temp controller off eBay for the engel fridge. Just set fridge to max and it stays within 1* of set temp.

Attachment 49956

Attachment 49957

How did you go about wiring this up mate?

[threedogs]

How did you go about wiring this up mate?

I did a DIY thread on it a while ago I'll try and find it for you

http://www.ebay.com.au/itm/12V-LCD-D...item2589fe1e5b

cheap enough but I'll get the box size etc tomorrow with measurements and pics

[oncedisturbed]

Also where did you get the gauge from? Is it a universal temp gauge?

[threedogs]

http://www.nissanpatrol.com.au/forum...emp+controller
Heres the thread the controller is only $16 free post on Ebay

http://www.ebay.com.au/itm/12V-LCD-D...item2589fe1e5b

Put the link in the wrong post but this is about ave. price

[Beni C]

Thanks TD!

[sooty_10]

How did you go about wiring this up mate?

TD has already added a link etc, I just got mine off ebay a well.

I have a small headphone socket next to my engel power socket to the left of the fridge in the back. I used a 90 degree old headphone plug and attached it to the temp probe. The probe is cable tied in the fridge. I can then simply disconnect the probe wire and the fridge power to remove the fridge as needed.

I'll get a pic might make more sense....

[sooty_10]

Here's a pic of the engel plug with the headphone jack for the temp probe.

image-2532115112.jpg