What did you do to your Patrol today!

[Avo]

Replaced tapper cover gasket,fix a couple of electrical issues(fixed rpm sensor wire but cannot get temp gauge to work.....karput)fixed leg on awning...car dash still in pieces but need to order a part....

I should add that good old rusty helped aswell...good job having a T/A

[Rustyboner81]

Replaced tapper cover gasket,fix a couple of electrical issues(fixed rpm sensor wire but cannot get fuel gauge to work.....karput)fixed leg on awning...car dash still in pieces but need to order a part....

Fuel gauge or temp gauge?

[Dales300exc]

Bought some flogged simexs to see how 35s fit.

[BigRAWesty]

Bought some flogged simexs to see how 35s fit.

Nice. What lift is that?? Any scrub??

[Dales300exc]

Rears look like they should clear ok. Still heaps of room in rear guard before they hit in that pic bearing in mind it still has a fair bit of flex left in it. But they are probably 20mm bigger when new. Fronts will be fine with radius spacers. Its a basic 3 inch lift.

Still a substantial increase from my 33 mtzs

[Sonterr]

Fitted my LH rear lights unit which my car seller ordered for me, turns out the bracket and globes weren't stuffed as he said but instead the wiring to the lights are just f*#ked..
All my interior lights also stopped working to.. joy.. I hate electrics.

[gaddy]

Worked out why my break light fuse kept on blowing , just nicked a wire to the barn door brake light when I put the table on DOH

[timbar]

Dropped the patrol at the lpg repairer today to get my tank tested and re stamped ...... Next step is the pits and should pass first time woo HOO should be back on the road by the end of the week all goes well !!!!!

[Rumcajs]

Replaced dodgy IC fan temp switch (I really need to do something about that adjustable unit I have built from Jaycar)

IC_temp_switch_zps198f5866.jpg

and

Added another earth lead/strap, never enough on Patrol, LOL

Extra_earth_lead_zps332f56e0.jpg

Cheers

[BigRAWesty]

Also out of curiosity what style of aerial did you use? Stranded cb one or is there a propper am fm one??

Rears look like they should clear ok. Still heaps of room in rear guard before they hit in that pic bearing in mind it still has a fair bit of flex left in it. But they are probably 20mm bigger when new. Fronts will be fine with radius spacers. Its a basic 3 inch lift.

Still a substantial increase from my 33 mtzs

Just watch out with radius spacers that the panhard bolt doesn't collect the steering Rod when flexing..
I Did read somewhere here of this happening when they fitted drop boxes and got sent spacing drop boxes..