GU Christmas Tree

[im2xtreem]

Once you have your wires run and your pins soldered, you need to remove the black insert from the back of the plug and slot your wires through it and then simply slot them into the plug (in the right spots!). re-insert the black insert and your ALMOST done. Lastly, you need to mount your earth point. I chose one of the bolts that secure the jack mount. I must admit at this point, in the absence of the right sized crimp terminal, I did a dodgy job and simply stripped a longer length of wire and wrapped it around the bolt and then screwed it back in. Dodgy, it is...work, it does!
Plug in the new light and mount it...JOB DONE! Put on the shades, stand back and bask in the glow of your new tail lights.

I know what you mean about the price from Nissan Stephen...CRAZY! I got mine for $190 a pair (I bought two for both me and my mate) and $20p/h. I was very happy with the price and even happier with the quality.
Plasnart, Thanks mate. I'm glad you liked it. I just hope it helps make the job that little bit easier for anyone else wanting to do it.