Merged - Deleted "Wanted"

[patch697]

Did that old mate - they recommend original units (apparently you "simply" bend the arm to suit and that is the recommended and most common approach?).

Can't find a second hand one, and being mines a 92 model the price difference is huge- $87 for a Pre 92 model, nearly $500 genuine for a post 92 model ???? Appreciate they had bigger lines in them, but what would that matter to a sender?? Or should I just be getting an earlier model one considering it's going to be bent to suit anyway???

I think the post 92's actually had smaller line size, 7mm from memory as apposed to the pre 92's 10mm line size...

The price difference I expect is the post 92 run an "in tank" electric fuel pump that is located at the bottom of the fuel pick pipe which it part of the sender unit so that may be the reason for the difference in the pricing, however unjustified.

Just a point to be aware of here.... You will more then likely need a higher volume electric pump over the STD so if you go new try to get a sender without the pump. It might bring down the price a bit if you can, but check it out with your blokes to see what combo they intend on using first.