XLR8 Fabrications

[Dark 1]

Pic of GQ with light protection


Haven't done anything for a high mount yet although winch box could be easily redesigned to suit. All products are powdercoated. Cost with 65 O.D. center hoop and upper wings would be $1250 with headlight protection or $1050 without. Freight would be approx $200 via Toll (sent one to NSW recently at that price)

Not much of a GQ man but that bar looks amazing sh@t hot.
Any idea of freight for the gu splash guard to nth qld 4740

[XLR8]

Not sure but will find out and let you know

[XLR8]

Just completed - Gu Custom Tube Bar (non air-bag)

[Clunk]

that's some pretty tasty bar work there mate....... gotta be happy with that

[nowoolies]

shoot mate thats sh!t hot hay

[Dark 1]

Mate i love it, i want it, i need it..........HOW MUCH DO I NEED TO CON THE MISSUS!
Questions tho 1 where the small 140 strikers are around the winch will 170's fit their
2 is there enough room for the control box in the winch cavity
3 can you use a larger dia bar for the main centre hoop
4 in the last pic could you close up the little space between the bars like at the front
5 are you looking at doin scrub bar/sliders to suit this bar


Like i said love it, your a master fabricator.
Kelvin.

[XLR8]

Mate i love it, i want it, i need it..........HOW MUCH DO I NEED TO CON THE MISSUS!
Questions tho
1 where the small 140 strikers are around the winch will 170's fit their YES
2 is there enough room for the control box in the winch cavity No, but it does fit in behind the bar on the drivers side under the headlight quite neatly (TJM 9500 Lbs Ox winch & controller) This one was built with approach angle in mind so sits very close to the body
3 can you use a larger dia bar for the main centre hoop I could. This one has 50NB main bar, 40NB hoop and the rest is all 32NB, all 3.2mm wall
4 in the last pic could you close up the little space between the bars like at the front Absolutely
5 are you looking at doin scrub bar/sliders to suit this bar Ummmm, No. Not because it can't be done, I just don't like doing it lol If someone was to order them though I would build them.
Like i said love it Thanks mate, always nice to get other peoples opinions and feed back

Kelvin.

If you want to pm your mobile number, I can give you a call to discuss design, pricing, shipping etc.

Disclaimer_Please note that this bar has not been tested for air-bag compatability

Mike

[AB]

Great bar work Mike!!!

[Dark 1]

If you want to pm your mobile number, I can give you a call to discuss design, pricing, shipping etc.

Disclaimer_Please note that this bar has not been tested for air-bag compatability

Mike

Hi Mike Thanks alot for your reply, mate i love it & am seriously considering placing an order, as you've probably seen life is a bit hectic at the mo [blown gearbox, selling house & other nasties] but once things settle down a tad will definately contact you to place order.

OH & did i say I LOVE IT!

[Timbo]

WOW.. nice work mate.

Any chance of an Airbag version? Only thing stopping me from getting a new bullbar (mines twisted) is the ADR factor.