OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 30

Thread: 94 GQ Coil Cab

Threaded View

  1. #27
    Advanced Dasa's Avatar
    Join Date
    Aug 2019
    Location
    North central VIC
    Posts
    35
    Thanks
    3
    Thanked 90 Times in 25 Posts
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    The pump sucks from the rad cap side so if anything it's decreasing pressure on it. The cap is just dealing with the pressure from the expansion of the water and is typically rated for under 16psi while the pump bursts at over 70 psi but can only pump up to 7.2psi.

    Anyway it made it to Pambula and back while staying under 85c and the temperature gauge was around 1/4 to 1/3 vs the usual 1/2 to 3/4. So it's running better than the rusty old high flo pump with a warn out housing but i also hosed out the rad and condensor which could be what's helping most.

    I think I will change the pump settings so that it doesn't ramp up to full speed till 100c vs the default 85c and see how it goes.
    Last edited by Dasa; 13th September 2025 at 09:50 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •