Jay see 1997 GU build up

[jay see]

Too late as your probably on the road but i do recall something about a particular solder joint on the Dash panel pcb can come lose. This can be corrected by resoldering the joint. If its an earth issue id just find the earth wire from the dash and run a new separate wire and earth it off the body, much quicker that tracing the wire to find where the bad connection is.

Drove from Robe to port Augusta with a stop in gawler and the dash stopped once for a shorter time and that was early in the day. I did take out the cruise control switch that's on the dash, the one that feels not right to replace it, but can't find one in time. Will see if I can pick up a switch from a wrecker along the way.

If it continues to lose the dash I will take on the information and do something about it when I'm back home..

Sent from my Pixel 7 using Tapatalk