Getting the Patrol ready for the upholsterer work on the roof lining, I had some tasks to complete before handing the car over to the guy. Roof lights, rear view mirror and roof sound deadening required fixing/working on.
Roof Lights:
The lens from the 18 wheeler side marker has a smaller diameter than the Patrol one, so it fits inside the roof light base. I have used a small Dremel disk to cut the slot for the lever and drilled new holes for screwing lens and light base all at once.
20240531_142251.jpg 20240531_142314.jpg
20240531_142232.jpg 20240531_142328.jpg
It looked quite ok. I know these lenses are available at PatrolApart, but for the simulation I ran, one pair of lenses would arrive here after tax for the same price as one brand new 285 tire. Someday, maybe.
20240531_142658.jpg
20240531_142702.jpg
20240531_142707.jpg
Rear View Mirror:
My rear view mirror had the centerpiece security collision thing missing (guess why), and I have opted to fix it.
s-l1200.jpg
Found a washer with OD slightly bigger then the ID of the mirror base and a very small ID. Filed the OD of the washer to match and cut some slots to it for the glue to grab and keep it from spinning under tork. Pressed a rivnut to the washer and glued it all to the mirror base.
20231229_132738.jpg
20231229_132730.jpg
20231229_132719.jpg
20231229_132933.jpg
20231229_133807.jpg
Roof Sound Deadening:
20240530_142822.jpg
First stage which is butyl rubber for holding steel panels from flapping and resonating is done. Second stage which is heat insulation will be done over the weekend. I'll have it finished and post the complete work once it is done.