Honey Badger the Y60

[PeeBee]

Getting the Patrol ready for the upholsterer work on the roof lining, I had some tasks to complete before handing the car over to the guy. Roof lights, rear view mirror and roof sound deadening required fixing/working on.

Roof Lights:
The lens from the 18 wheeler side marker has a smaller diameter than the Patrol one, so it fits inside the roof light base. I have used a small Dremel disk to cut the slot for the lever and drilled new holes for screwing lens and light base all at once.
20240531_142251.jpg 20240531_142314.jpg

20240531_142232.jpg 20240531_142328.jpg

It looked quite ok. I know these lenses are available at PatrolApart, but for the simulation I ran, one pair of lenses would arrive here after tax for the same price as one brand new 285 tire. Someday, maybe.
20240531_142658.jpg

20240531_142702.jpg

20240531_142707.jpg


Rear View Mirror:
My rear view mirror had the centerpiece security collision thing missing (guess why), and I have opted to fix it.
s-l1200.jpg

Found a washer with OD slightly bigger then the ID of the mirror base and a very small ID. Filed the OD of the washer to match and cut some slots to it for the glue to grab and keep it from spinning under tork. Pressed a rivnut to the washer and glued it all to the mirror base.
20231229_132738.jpg

20231229_132730.jpg

20231229_132719.jpg

20231229_132933.jpg

20231229_133807.jpg


Roof Sound Deadening:
20240530_142822.jpg

First stage which is butyl rubber for holding steel panels from flapping and resonating is done. Second stage which is heat insulation will be done over the weekend. I'll have it finished and post the complete work once it is done.

Hey Brazzy,

I have a TI over windscreen light with the big double illuminators if you want it - can post it to you . You just need to run a Pos and Neg power cable across to the centre of the windscreen, now is the time to do it before the upholsterer does his magic. It screws into factory holes. Let me know. Phil