Dawes Valve

[nickpeacock36]

I have finally got all the parts top fit my Dawes and needle valve. I just wanted to let people know how good 3 Bar Racing customere service is. I ordered the TDI valve and it seems that it got lost in transit. a quick email to 3 Bar and one was on its way via recorded delivery for no extra. I was told to pass the other on to a forum member if it turns up so if it does its first come first served.
Now for some more head scratching and cursing as i try to fit it.
Do i have to adjust the turbo back to where it was before blocking the EGR?

[big_fletch]

I got my dawes valve though same company and got excellent customer service from them..
Depending on where your screw is set for boost on the turbo it might not need to be touched again..
Set up your dawes and needle valve and adjust after that.. mine sits about 10-12psi at 100-110km/h and the exhaust temps are around 260-300 degrees (I don't have an exhaust or chip either)

[snicko]

Hi Nickpeacock36 I want to get Dawes Valves so where is 3 Bar Racing?

[big_fletch]

Hi Nickpeacock36 I want to get Dawes Valves so where is 3 Bar Racing?

The company is over in America, I ordered mine direct off there site.. was about $60 delivered
http://www.3barracing.com/product_8.htm

[Sir Roofy]

the company is over in america, i ordered mine direct off there site.. Was about $60 delivered
http://www.3barracing.com/product_8.htm

thanks fletch ill keep this for down the track

[nickpeacock36]

I got my dawes valve though same company and got excellent customer service from them..
Depending on where your screw is set for boost on the turbo it might not need to be touched again..
Set up your dawes and needle valve and adjust after that.. mine sits about 10-12psi at 100-110km/h and the exhaust temps are around 260-300 degrees (I don't have an exhaust or chip either)

Ok cheers Fletch, will have to keep an eye on boost and temp then.

[nickpeacock36]

Hi Nickpeacock36 I want to get Dawes Valves so where is 3 Bar Racing?

Sorry Snicko, i wasn't ignoring you. i left the pc on and was watching a racing car is born ont telly. Big Fletch is spot on with the address.

[snicko]

Sorry Snicko, i wasn't ignoring you. i left the pc on and was watching a racing car is born ont telly. Big Fletch is spot on with the address.

Thats OK..I would be very interested as how you go as I need the valve but no one in my life is listening.........

[nickpeacock36]

Thats OK..I would be very interested as how you go as I need the valve but no one in my life is listening.........

Ok Mate, Will let you know. Cheer up, you do own a Trol after all.

[big_fletch]

Ok cheers Fletch, will have to keep an eye on boost and temp then.

You might find this interesting, is on Chaz homepage, gives you great detail into installing dawes and needle valve
http://www.chaz.yellowfoot.org/Manua...Controller.htm