Quote Originally Posted by Ontheroadagain View Post
We tested the priming pump/bulb before, during and after starting and it remains soft. We then tried squeezing the pump 5 to 6 times and it did become hard for about 3 to 4 minutes and then became soft again.

We took another look at the dashboard for a light, but only see blanking covers on each side of the dash, see photo attached.
100% air in lines.
Replace your fuel filter and get a new rubber seal and take care installing it.
Massive issue if rushed on not done properly as it would bleed air in.
Once hot and all slightly more expanded your issue is exasibated..

Sent from my SM-S916B using Tapatalk