Hey mate, it's one slider door, 2600w. I am yet to install a lower slider track, I need to grab some from work. The top track is from an industrial castor manufacturer in Clayton, they had some good gear there, and it was bloody well priced. Unfortunately they didn't have the guides so I'm going to install some 50mm angle and use that to guide the entire door. Should be able to capture the entire door on open and capture each end on close, I've left 100mm overhang either side of the door. Add that with a pad bold either side the door hopefully won't go anywhere.Originally Posted by MB
Far from a builder Nicco Mate, and struggling on a little screen to see properly, slider doors?
In my nuffy experience, my double shed sliders, wide open side have nearly taken out half of the hills when winds got out of control. Closed ‘deep’ concrete dropbolts definitely saved the days in storms and user rules of either open full and or closed are needed.
Go crazy and add a shipload of extra slider guides for say 1/4 - 1/2 - 3/4 open to secure the flappy bottom.
I suspect bracing diagonally would be needed more than ever as my kit bought many years ago does have Brother
Sent from my iPhone using Tapatalk
Sent from my SM-G986B using Tapatalk
Reply With Quote