Wheel wells were somewhat in good condition. Front-left side had a crack that was nicely welded and sanded down but that's all.
20200718_134042.jpg 20200718_134105.jpg
20200815_183726.jpg
20200815_183554.jpg
Cleaned them all, applied some wash prime on any exposed metal part and then coated them all with a product called Siltex 400. It is a rubberized/urethane thick coating that both protects the sheet metal from rocks and debris and sound deaden the wheel well. It is marketed as "body protector" and you use a plastic disposable paint gun to apply it, because it will clog the gun if you left it dry for a few minutes. My gun is still good to use as I have cleaned it good right after applying the product, but the idea with the disposable one is not to risk a good paint gun with it.
20210522_153315.jpg
20210522_153305.jpg
20210522_164521.jpg
20210522_164535.jpg
20210522_151117.jpg 20210522_151032.jpg
Reply With Quote