Quote Originally Posted by mudnut View Post
I found the radius of the corners of the glass were cut too far in and leaked. I used a couple of bits of 1-2mm flat plastic to lift the rubber seal so I could pump a small amount of black sikaflex in.

That was back in 2012-13. I have seen no rust appear. The sikaflex is in the channel between the glass and rubber, so does not to touch the body.

Did they replace the seal?
yeah they did replace the seal, i’ve been told by a lot of people (including patrolapart) not to put sikaflex or silicone anywhere in the seal because it blocks drain holes and can cause rust due to water sitting on the window frame behind the seal