Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
So I started stuffing around with adding an external switch. Piss farting around trying to find a good discreet spot for the switch. Rummaging through my box of lecky bits and I found this. IMG_3324.jpg
Kinda forgot all about it.
So I ditched the switch idea and turned my thoughts to this.
It’s made for VRS winches, having all the correct plugs to fit. Got the side cutters out and lopped them off and grafted it in to the Patrol.
All works as it should.
But now I’ve decided to remake an entire new engine bay loom from the relay box.
As I had modded the OEM relay box to house all the extra relays I was running.
This pic is what it was like. Tons of spare spaces. 17.jpg
Fast foward to the final mod. 20151215_181652 (Medium).jpg 20151216_193108 (Medium).jpg
But, this mod was done what I had projected HID light with LED angel eyes and blue Devils eyes. These are now gone so I still have the relays connected. So I will remove the relay box and rewire it again so I can use these relays for something else.
A big can of worms I think I have opened up. Rewiring this relay box was a BIG job...
Sent from my iPhone using Tapatalk
Last edited by mudski; 13th August 2020 at 10:29 PM.
Reply With Quote