Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
I did three of these in total, then ran them through the bender and welded them end to end.
The end result is too long to easily take a photo of, but it should be welded to the side of the frame rail in due course.
Cleaned up the rear of the thing - removed what remained of the rear gutter and marked out the bit I need to cut out and patch: rrrust.jpg
I ground off the rust in the good areas and gave them a shot of primer, but it was too dark to get a good photo.
The next task is the back corner. A bit rusty... rrcorner.jpg
I'll have to fabricate and weld in a temporary support for the roof frame before I chop that lot out.
Reply With Quote
