
Originally Posted by
missingdna
in the corners of the windscreen rubbers you will see join lines where the rubber is glued together when made. It is common for these joins to "let go" leaving gaps in the rubber. If the joins have let go then you will be up for a new one as well as a screen. A well prepared fitter would have a new rubber with them "just in case" as it is very common now due to the age of the rubbers.(also happens on the rear barn door glass rubbers too)
The interior trim (vinyl) running up the pillars and across the roof tucks around the apperture, underneath the rubber lip. this is often disturbed when removing the old screen and roping in the new one. The final finish of the vinyl will depend mostly on its condition before starting ie: how was it sitting before, has it perished/hardened up due to age, etc. Ive found that the vinyl is pretty easy to tear when installing the new screen, not due to poor fitting but more to do with its age and condition.
LEAKS...... if a car leaks before the screen is removed, and still leaks in the same place/way after it has been replaced (as long as it was replaced properly) then it usually ISNT the screen it is leaking from......BUT!!!!!! any reputable fitter/company will warranty their work and be willing to at least look at it and test it to confirm either screen or something else at fault.
The only other problem can be RUST!!!!..... you need to be there when the screen is removed to eyeball it yourself. You need to see how bad it is,and any decent fitter should be able to spend a little time going thru options with you if rust is present. Be aware that no w/screen company will warranty any screen for leaks if rust is present. They dont call rust car cancer cause its cute.
If the fitter works for a larger company then make sure you get his name and note it on your copy of the invoice. If he gives you shit service, ring his company and complain......but on the flip side if he does great then ring up and let his bosses know.