Quote Originally Posted by Rossco View Post
Hey mate, what exactly are you struggling with. I did this conversion years ago and was fairly straightforward adapting most things to the TB loom. Picked up power for the injector pump from plug to carby , alternator extended across to other side, oil pressure and temp senders hook up as usual from memory as with starter. I used an aftermarket Boggart glow plug timer which works great and even wired up to factory dash light. Will need TD cluster to use tacho, I got mine wired up but pretty sure it is just wired up directly into pin out from sender, I know Chappy had it in his build thread somewhere which i could probably dig up if need be. . Good luck!

Sent from my SM-G930F using Tapatalk
Hey mate, I did read Chappy's he did the whole loom and cluster replacement. Basically im aware of the alternator but the loom off the carby not sure how to work out what goes where tbh