Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
The subtank switch has:
- an indicator light (2 wires)
- illumination/dash light (2 wires)
- a single make/normally open non-locking contact - contact only closes while held pressed (2 wires).
Total of 6 wires.
Any switch with those basic fittings that fits the hole you want to use should suffice.
An alternative is just the single contact and mount the indicator light separately; and you could possibly do without the illumination light.
On mine (2015 GU wagon) I just extended the form wiring so I could mount the existing switch in a spare position on the centre console near the gear lever where it can be easily seen and operated. There was a blank position so I just swapped the blanking plate and the switch. The existing wiring will not reach without some extra length.
Reply With Quote