ATF in transfer case?

[Plasnart]

Cheers Plassy mate!
I’ll chuck up 23 more posts and download soon :-)
Is it possible we haven’t experienced any issues due to usually slow mountain pace and not higher speed say sands?


Sent from my iPhone using Tapatalk

You know me mate. What sort of tech expert have you mistaken me for?

[MB]

Me too mate, honestly and truly cannot nuffy me understand but truly willing to find out how a manual gearbox ad transfer case conected can somehow affect either my same vintage utes manual hubs or our family wagon auto hubs?
There must be more to this for sure


Sent from my iPhone using Tapatalk

[Plasnart]

Me too mate, honestly and truly cannot nuffy me understand but truly willing to find out how a manual gearbox ad transfer case conected can somehow affect either my same vintage utes manual hubs or our family wagon auto hubs?
There must be more to this for sure


Sent from my iPhone using Tapatalk

It's all in the viscosity I'm led to believe. Keep it low and don't turn your transfer case into a torque converter.

Sorry think this thread has taken a wayward turn from post 1?

[MB]

But don’t you have to move that second sneaky gearstick from 2WD <> 4WD H/L choice to make the front tail shaft spin old school?


Sent from my iPhone using Tapatalk

[Plasnart]

But don’t you have to move that second sneaky gearstick from 2WD <> 4WD H/L choice to make the front tail shaft spin old school?


Sent from my iPhone using Tapatalk

Enough friction/resistance through the TC tricks the auto hubs just like a lever pull I understand. Manual hubs don't listen of course.

[MB]

So the front tailshaft starts spinning by itself even when selected 2WD ?
This almost has to be a 2008++ elecy thing surely?


Sent from my iPhone using Tapatalk

[Plasnart]

So the front tailshaft starts spinning by itself even when selected 2WD ?
This almost has to be a 2008++ elecy thing surely?


Sent from my iPhone using Tapatalk

It's a mechanical transfer of torque I believe they're trying to prevent through the TC with the ATF specification for auto hubs only.

[MB]

Enough friction/resistance through the TC tricks the auto hubs just like a lever pull I understand. Manual hubs don't listen of course.

Okily Dokily, hopefully understand re-reading now, will wrap a long tailed zippy tie around her front tailshaft and see if we get some noise complaints tomorrow


Sent from my iPhone using Tapatalk

[PeeBee]

Enough friction/resistance through the TC tricks the auto hubs just like a lever pull I understand. Manual hubs don't listen of course.

Plassy, what actually triggers or moves the auto hub from disengaged to engaged - hydraulic fluid - I have the manual hubs on the old GQ, so never struck this or even had the need to look into auto hubs.

[Plasnart]

Plassy, what actually triggers or moves the auto hub from disengaged to engaged - hydraulic fluid - I have the manual hubs on the old GQ, so never struck this or even had the need to look into auto hubs.

Got no idea PB. Hopefully someone with better tech knowledge than me can chip in.