Finished cleaning it, off for a tyre rotation and wheel balance tomorrow.
Service later in the week and ready for the next adventure.
Finished cleaning it, off for a tyre rotation and wheel balance tomorrow.
Service later in the week and ready for the next adventure.
Cheers
Jack
2024 Isuzu MUX
Formerly 2012 Simpson 50th Anniversary Edition.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Dropped the winch out for a clean & re-grease.
Soaked the gears etc in petrol for the day.
No wonder it didn't want to free spool...
How they jammed 6 litres of thick black grease in a 4 litre winch gearbox is beyond me.
2005 TD42TI
MB (15th October 2019), Yeti's Beast (15th October 2019)
Just finished final cleanup of winch guts.
Looked like kilos and kilos and baby poo shoved inside and sealed ! Come out nice and clean after a bath in a blend of diesel and petrol.
Seals at motor end done a good job at keeping water out, mostly.
Inside of drum a bit rusty otherwise all good. Rotor in good nick.
Everything covered with Inox mx3 , and then all the cogs , regreased and ready to re-assemble.
Will bench test tomorrow, then good for another year.
![]()
Last edited by Hodge; 17th October 2019 at 07:39 PM.
2005 TD42TI
Vehicle went off for its 4 inch exhaust today.
It then gets sent to tune shop
Hoping to pick it up on wednesday with 700rwhp 😎🤞 fingers crossed
MB (18th October 2019)
Winch re-assembled, putting it back on the car tomorrow.
Motor sealed and back together. Time for a test.
![]()
Clunk (25th October 2019), MB (18th October 2019), Yeti's Beast (18th October 2019)
Thanks heaps again @Cremulator mate!
Fitted our new ebay one just now after 18 years service on the oldy. Was becoming brittle too so really appreciate the heads up on your findings kindly shared mate!
These ones are a different profile to the OEM folks so do take note of the little instructions paper shipped within.
“Flat side facing out”
Sent from my iPhone using Tapatalk
Cremulator (19th October 2019)