-
11th August 2019, 10:25 PM
#1
Expert
Fridge Slide install to already homemade draw unit
Hi Guys, just fitted my fridge slide to my already homemade draw unit in the GU patrol. as you can see in pic's regards Alex
1.jpg2.jpg3.jpg
97 GU Ti 4.5 on lpg , uhf icom Pro400, Garmin GPS Maps, HD-Lukas Dash Cam with gps tracking. Snorkel , I-Max 12000lb Winch , Twin rear light bracket on wheel carrier for light & uhf antenna,Draws unit, Electric Cargo barrier, HID headlights kit, LED Light Bar, 2 inch lift with HD King springs and Monroe Gas Magnum TDT 4WD Shock Absorbers, BS Dueler 697 Lt 285/75R-16 .
-
-
11th August 2019 10:25 PM
# ADS
Circuit advertisement
-
11th August 2019, 10:29 PM
#2
Expert
then I added some side support rails so I mount the cut out top piece for the fridge side.
5.jpg6.jpg
97 GU Ti 4.5 on lpg , uhf icom Pro400, Garmin GPS Maps, HD-Lukas Dash Cam with gps tracking. Snorkel , I-Max 12000lb Winch , Twin rear light bracket on wheel carrier for light & uhf antenna,Draws unit, Electric Cargo barrier, HID headlights kit, LED Light Bar, 2 inch lift with HD King springs and Monroe Gas Magnum TDT 4WD Shock Absorbers, BS Dueler 697 Lt 285/75R-16 .
-
-
11th August 2019, 10:38 PM
#3
Expert
The draw that I removed , I cut in half and works as it did before but half the space lol
7.jpg
with some prettying up e.g. trim and black spray paint.
9.jpg
97 GU Ti 4.5 on lpg , uhf icom Pro400, Garmin GPS Maps, HD-Lukas Dash Cam with gps tracking. Snorkel , I-Max 12000lb Winch , Twin rear light bracket on wheel carrier for light & uhf antenna,Draws unit, Electric Cargo barrier, HID headlights kit, LED Light Bar, 2 inch lift with HD King springs and Monroe Gas Magnum TDT 4WD Shock Absorbers, BS Dueler 697 Lt 285/75R-16 .
-
-
11th August 2019, 10:41 PM
#4
Expert
Here's the final to the working fridge slide that holds my 55 litre fridge
8.jpg10.jpg
97 GU Ti 4.5 on lpg , uhf icom Pro400, Garmin GPS Maps, HD-Lukas Dash Cam with gps tracking. Snorkel , I-Max 12000lb Winch , Twin rear light bracket on wheel carrier for light & uhf antenna,Draws unit, Electric Cargo barrier, HID headlights kit, LED Light Bar, 2 inch lift with HD King springs and Monroe Gas Magnum TDT 4WD Shock Absorbers, BS Dueler 697 Lt 285/75R-16 .
-
The Following 6 Users Say Thank You to altech For This Useful Post:
MB (12th August 2019), mudski (12th August 2019), PeeBee (12th August 2019), rusty_nail (12th August 2019), SamIam (4th April 2021), Touses (12th August 2019)
-
12th August 2019, 07:58 AM
#5
You are very handy and talented guy - looks great, keep up the good work, always keen to see a new idea.
-
The Following User Says Thank You to PeeBee For This Useful Post:
altech (12th August 2019)
-
12th August 2019, 08:18 AM
#6
Patrol Guru
Nice one. Great job retro fitting it to the existing drawers.
Thanks for sharing.
-
The Following User Says Thank You to Cremulator For This Useful Post:
altech (12th August 2019)
-
12th August 2019, 08:23 AM
#7
The master farter
Top stuff mate. Next to build a cage around the fridge. Then you can pack stuff over and around it and still pull the fridge out.
-
The Following User Says Thank You to mudski For This Useful Post:
altech (12th August 2019)
-
12th August 2019, 10:05 AM
#8
Expert
Originally Posted by
mudski
Top stuff mate. Next to build a cage around the fridge. Then you can pack stuff over and around it and still pull the fridge out.
not much room to use as the fridge height is at max headroom inside the rear cab, still have the back seat for storage if needed cheers Alex :-)
97 GU Ti 4.5 on lpg , uhf icom Pro400, Garmin GPS Maps, HD-Lukas Dash Cam with gps tracking. Snorkel , I-Max 12000lb Winch , Twin rear light bracket on wheel carrier for light & uhf antenna,Draws unit, Electric Cargo barrier, HID headlights kit, LED Light Bar, 2 inch lift with HD King springs and Monroe Gas Magnum TDT 4WD Shock Absorbers, BS Dueler 697 Lt 285/75R-16 .
-
The Following User Says Thank You to altech For This Useful Post:
mudski (12th August 2019)