Would someone be able to plug a scan tool in to their car and read the live trans data for me and tell me if the speed sensor 1 and speed sensor 2 from the auto trans are both meant to be giving a value. Mine only sensor 2 reads anything.
Thanks
Would someone be able to plug a scan tool in to their car and read the live trans data for me and tell me if the speed sensor 1 and speed sensor 2 from the auto trans are both meant to be giving a value. Mine only sensor 2 reads anything.
Thanks
This is a Scantech shot of my trans in D at idle. The SE-Meter reading of 5 kph is actually incorrect because the car isn't moving but I don't think the TCU uses the meter reading unless it's not getting a correct signal from the A/T unit. The AT.PDF explains it a bit better.
..
Trans scantech.jpeg
John
2001 GUII TI 4500 - Now converted to TD42T auto with Nomad valve body
MudRunnerTD (23rd June 2019)