detective Rossco!Originally Posted by Rossco
Nice job Daz its getting there, should be able to drive it soonish ?. Need to do the same to my fronts soon so i can get flaps back on and not rub. I did notice nice job on the lawn too whilst the wheels 's were off.
Nice one Dazz, I wonder if anyone's cut on the fold line by accident before
MudRunnerTD (31st May 2015), Rossco (31st May 2015)
That's something I'm likely to do i reckon. . . Nekminit - godamit!!detective Rossco!
Nice one Dazz, I wonder if anyone's cut on the fold line by accident before
AB (31st May 2015)
You could weld a new tab on and I know guys that prefer that option but seems like more work to me although they get a sharp fold that way but me and welding panel steel have good and bad days.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
@Winnie here is that thread mate.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Been looking over this thread for a while and just done my front guard chop this weekend. Pretty happy with how it came out, I used the same methods Darren has used in this post.
It is also worth noting that to fit 35s you don't really need to touch the rear guards but for the sake of 20 mins you can trim about 30mm of plastic with a knife of the front edge of the rear guards. Hard to see what I mean but you can see where you would trim in this pic.
Sent from my SM-G960F using Tapatalk
Nice one looks neat as. Are you going to trim back of gear guards or just leave it?
Sent from my SM-G930F using Tapatalk
I wasn't going to. I spoke to Darren and he said he did not need to with 35s. There's not much meat there to get more out of it. What do you reckon?
Sent from my SM-G960F using Tapatalk
Probably don't need to but does make it look a bit more matched to 35s. Definatly scrubs without quarter chop. What control arms you got, if you go aftermarket can get the diff back a bit further with slightly longer ones more to the middle as lift moves it forward. .
Sent from my SM-G930F using Tapatalk
Yeah I've got standard length arms so the diff sits a little bit further forward than standard.
Sent from my SM-G960F using Tapatalk
Rossco (20th May 2019)
I reckon worth doing while your at it, kinda matches the front bit of rears. .
Looks really high with no weight in the cab but settles down pretty nice, think they're 10mm longer arms too.
Sent from my SM-G930F using Tapatalk
Winnie (20th May 2019)
Posting Permissions
Reply With Quote
