There should be a switch on the top of the manual box with two wires coming out of it.
There should be a switch on the top of the manual box with two wires coming out of it.
Buddrick, the procedure for wiring the reverse lights along with the start inhibitor, is in the PDF document at the start of the thread. Cheers Paul
That worked thanks for the info
great manual mate half way through my conversion atm and this could be a life saver with the wiring
Thanks for the info mate. I can't see the file you attached in the beginning of the thread
Did you get the email when you joined up verifying your email addy, I dare say you didn't and that is why you cannot see the attachment.
Boss man ( @AB ) can fix this for you.....
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Just finishing off a manual conversion on my shorty. Thanks you for the supplied wiring info. saves me stuffing around with a multi meter for half a day. Legend
Last edited by Barrbeast; 7th June 2023 at 11:37 PM.
1990 4.2 Diesel SWB Safari MT - 2" lift + long travel shocks, 33" MTs, -35 Steelies, 17000lb winch, Steel bumpers, Rock sliders, Snorkel, CB, Manual hubs, LED lightbar, Rear secure drawer, Rear drop down table, Manual gearbox conversion.
Touses (8th June 2023)
Just discovered this absolutely beaut of a PDF. Mental, you're a godsend mate.
I've just ordered a pilot/spigot bearing and looking to complete the rest of the swap after I get that later in the week. Can't wait!
So glad I don't have to bugger around with the wiring, had been searching around for hours before finding this