Kyals TB48 Wagon

[KyalSharpe]

Swapped out the TD42 wagon some months ago for this TB48 wagon. In the past 8 weeks I've stripped it back to stock, put all my old suspension in, done a heap of maintenance and made some fresh bar work etc. Plenty more stuff to do so I am intending to keep this thread up to date with the coming modifications.

The good stuff:

-Raslarr Azza Bar
-Custom made sliders and Scrub Rails
-Custom made rear bar
-Custom gutter sliders and crossover hoops

Suspension

-PSR Flexi Coils (3 inch)
-Profender Remote Res Shocks (5 inch front, 6 inch rear)
-PSR Extended Rear Arms
-PSR HD Drag Link and Tie Rod
-Superior Hybrid 5-Link
-Superior Steering Dampener
-Superior Panhards
-Extended Brake Lines
-Custom dropout cones and coil retainers

Wheels

-Dynamic 17x9 -30 Beadlocks
-37x13.5x17 Gladiator X-Comps

Lights

-Stedi ST3K (Coming in the mail, will be mounted on the front crossover bar)

Electrical

-Redarc BCDC Charger
-Supercharge Truck Master cranking battery
-2x 85 Amp Hour Deep Cycle Batteries
-Engel 38L Fridge

Engine and Driveline

-Just a TB48 with extractors and an exhaust. Turbo setup planned once I am off my P plates.
-TJM Pro Locker in the front
-Braced front diff using the PSR Kit

Winch

-Warn High Mount
-RRO Motor
-Albright Solenoid
-Drilled and Tapped Brake Shaft
-Fill and Drain Plugs
-Rebuilt when I bought it

Other Stuff

-Titan Rear Draws
-Kings Awning
-XR6 Seats on custom rails
-Custom made false floor to replace back seats


Upgrades planned for this year

-Hydraulic Bumpstops front and rear
-ARB Rear Locker
-Twin Motor Setup for the winch
-Reduction Gears 85%
-Oztent Foxwing

[10G]

very nice looking truck buddy, well done.

[mudski]

Yeah sweet looking ride! Good with the camera I see too...

[PeeBee]

Those GU guards can sure swallow a big tyre. Great looking vehicle.

[KyalSharpe]

Thanks mate!

[KyalSharpe]

Thanks mate, all those photos are actually just off my Pixel 3. I have a DSLR but it spends more time in the cupboard than anything lol

[KyalSharpe]

Yepp they do a good job, still stick out a bit with the 13.5 width though. Only really gets driven to the tracks though so it isnt a huge concern.

[207 de]

Nice - what extractors and exhaust are you running?

I have a TB48 2004 and want to do some basic breathing mods, Was looking at Genie but not keen on a 2.5in exhaust... seems small for a 4.8L (I had a 2.0L turbo with 3in turbo back!)

Any suggestions?

[jay see]

Only really gets driven to the tracks

That's your problem there, that and the P plates. Looks good tho..

Sent from my CPH1979 using Tapatalk