Provent Catch Can installation help

[threedogs]

Dont forget to cable tie any hoses that are touching or rubbing on each other,,
trim them flush with a stanley knife or such. They will wear through if left.

[stoj34]

Mine is Di so I'm not sure what size is the rocker cover fitting on CrD but you can buy the whole shebang complete with hoses to suit your Patrol from Western filters, no need for reducers as hoses are molded correctly Provent-200-oil-catch-filter-kit-12mm-16mm-for-Nissan Patrol/

and

here are the installation instructions/notes ==>

provent-kit_prov10_nissan-patrol_2007-2015.pdf

Regards

Attachment 70593

Hi,

Where did you get the L bracket from? I bought the kit from western filters, but there was no bracket.

Thanks,

-Stoj

[denk82]

I am also looking for a bracket to suit 2012 CRD engine with dual battery and secondary filter on-board.

WhatsApp Image 2020-05-21 at 10.23.45(1).jpeg

[MudRunnerTD]

I am also looking for a bracket to suit 2012 CRD engine with dual battery and secondary filter on-board.

WhatsApp Image 2020-05-21 at 10.23.45(1).jpeg

I would fit a bracket on the back of the fuel filter bracket and put it there

Screen Shot 2020-05-21 at 12.48.36 pm.png

[Fireblade]

id put the fuel filter on the other side of the engine bay closer to the factory fuel system

[Arron Harvey]

That's the side my extra fuel filter is but flipped to opisite side of the bracket, then the provent is where your fuel filter sits currently, if that all makes sense.

Sent from my INE-LX2 using Tapatalk

[Arron Harvey]

I'll get a photo today

Sent from my INE-LX2 using Tapatalk