You're a bargain hunters mate, jealous of how little your project has cost so far
Sent from my SM-G930F using Tapatalk
You're a bargain hunters mate, jealous of how little your project has cost so far
Sent from my SM-G930F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
neet_wagon (10th October 2018)
So I finally got around to gutting the interior during the week after work:
And then tonight after work I sorted out the lower wall bracing for the rear wall of the dual cab:
I had an awful lot of trouble getting the Migomag to do what I wanted it to, so used to using the million year old Cigweld at work which performs flawlessly.
Finally got it to produce some half decent welds so off I went welding up the framework:
Had a meeting with the engineer at lunchtime as well, he is very happy with my plans and has given the all clear to complete both the dual cab chop as well as the barra conversion, so that's a big win right there!
Super pumped to get stuck into it and rip the TB42e out over the weekend.
I've also gone ahead and purchased some paint to paint the chassis/diffs/etc with once I lift the body off the chassis to replace the cab mounts.
Now all I have to do is figure out which wire does what at both ends of the vehicle, as unfortunately someone has chopped the plugs off it whilst it was sitting at the farm
GQtdauto (12th October 2018), growler2058 (13th October 2018), MB (12th October 2018), rusty_nail (12th October 2018)
Crikey NW mate, you certainly don’t muck around bloke, speed to ya good man, awesome stuff!!
Sent from my iPhone using Tapatalk
neet_wagon (12th October 2018)
Hi there, where do you go for ECU or PCM unlock?
Sweet and quick conversion too!! Keep up the good work
neet_wagon (15th October 2018)
20181007_143755.jpg
Heres some mid week inspiration for you. How you going with it all?
MB (23rd October 2018), MudRunnerTD (24th October 2018), neet_wagon (24th October 2018), PeeBee (23rd October 2018)
Been flat out at work lately, so haven't had a chance to get out and work on it unfortunately. And when I do get a chance it's been pissing rain, hopefully get a chance to get out there this weekend and do a bit more to it
Baby Daddy (26th October 2018), MB (24th October 2018), MudRunnerTD (24th October 2018)