ZD30 EGR or Head Gasket?

[Ali36]

Ah yeah. Coupla stubbies mate and its done. Scamming you for sure if he's just blocking the EGR. Its simple. Remove the intercooler, on the RHS of the motor, a cast pipe come up from the EGR valve, and bolts direct onto the intake manifold with two bolts. Undo the two bolts, drop the gasket out and put in the blanking plate, bolt everything back up and its done.
Thats it!!!

Cheers! I'll just do it myself and then get the head checked somewhere just incase

[mudski]

Cheers! I'll just do it myself and then get the head checked somewhere just incase

Yeah its not hard to do at all. The CRD motors are a bit harder, more fidly than anything.