Nah you don't need to spend that much on a full kit. You just need a straight flange and get hose and clamps from local autobarn, supacrap or repco.
I would personally get a straight flange and it just needs to suit a 51mm bolt spacing.
Something like this but have a search on EBay and maybe measure the vertical distance from turbo to block drain to make sure there's enough distance for the hose to do a nice even curve to your block for smooth drain and minimise sharp 90 degree turn of pipe so it doesn't kink if that makes sense.
https://m.ebay.com.au/itm/Turbo-Oil-...-/301682866510
Sent from my iPhone using Tapatalk
drgtr (28th March 2018)
Barb style oil drain flange.
Sent from my iPhone using Tapatalk
drgtr (28th March 2018)
You are too awesome.Originally Posted by AB
Thankyou.
I ordered this. My mate needs a feed line. I need the drain line.
https://www.ebay.com.au/itm/MAMBA-Tu...UAAOSw0hRZcZBz
Awesome that'll do. Make sure your mate pays $100 and you pay $22 lol
Sent from my iPhone using Tapatalk
Not to much crankcase pressure it's not breathing a bit hard ? Blocked engine breather
AB (28th March 2018)
Yeah my thoughts too Tip...
Sent from my iPhone using Tapatalk
Sorry i dont understand. Where is the engine breather? It has an oil catch can. Not much blow by.
Is it that round thing at the back of the rocker cover.
How do i clean or unblock it
Just remove the oil cap when running and see now much pressure its blowing out
Posting Permissions
Reply With Quote