Quote Originally Posted by Hodge View Post
@MudRunnerTD

You will need the same ones as I have Darren. It isn't a direct bolt on like other points John makes. There is a metal lip on one of the bull bar's brakets in the way. However, John, threedogs' metal mastery resolved that fairly quickly. I met up with him several times while he took measurements etc... And then built them to suit, supplied together with special washers for load spreading purposes.
I believe the set I have are the only ones of its kind he made. Yours might be the second!
There is a tiny bit of grinding involved too. I have photos at home if need be.
Hodge, looking at getting pair of recovery point from threedogs, been stumbling around the forum in an attempt to find your build thread (slowly finding my way, but a bit slow to get me head around it all). Could you give me a link of your build so I can have a look at what recovery points/fitting method you ended up with. Mine 08 GU IV wag with genuine steel bull bar / air bag compatible, Recovery hook bolts up to under side chassis rail(RHS). Thinking of the L shaped design (pic 1) or must say do like the look of the "T" profile build.